Temporary Abandonment Cap
The Temporary Abandonment Cap (TA Cap) is a tool that is installed on top of a subsea wellhead in order to protect the critical surfaces from subsea growth and corrosion.
Valve Hold Open Tool
The TMT Valve Hold Open Tool was originally designed to replace the existing diver installable tool for subsea trees with 2 1/16″ and 4 1/8″ valves.
Umbilical Sealing Cap
The TMT Umbilical Sealing Cap is designed to seal over the open end of a riser/umbilical after it has been cut.
Tree Cap Puller
The TMT Tree Cap Puller Tool is designed to facilitate the removal of a FMC internal tree cap installed on the GDA-01 Christmas Tree.
TMT Transponder Stand
The TMT Beacon Transponder Stand is a subsea positioning tripod used to support a range of different transponders.
TMT Tubing Hanger Emergency Release Tool
The TMT Tubing Hanger Emergency Release Tool (TH ERT) is an ROV interface panel that has brackets so that it may be mounted to a 5″ (127mm) outside diameter tube.
TMT Shaft Retrieval Tool
The TMT Shaft Retrieval Tool (SRT) is designed to be used if a shaft is stuck with only a minimal engagement length available.
TMT SST/FSB 18 3/4″ Override Tool
The TMT SST/FSB 18 3/4″ Override Tool was originally designed to open 18 3/4″ subsea trees at the connection between subsea tree and flow base, and the connection between flow base and wellhead.
TMT Flowbase Release Tool
The TMT Flowbase Release Tool is an ROV operated tool that has been designed to unlock the GTS Stabcon Flowbase from the Subsea Wellhead Housing Assembly.