Robust, proven design
Hydraulic pump motor
Submersible
Self-priming
Can run dry without damage
Lifting eye
The Stanley Trash pump provides up to 1688 L/min (450 gpm) of output flow, to pump high volumes of water, sand slurries, gravel, and mud.
Robust, proven design
Hydraulic pump motor
Submersible
Self-priming
Can run dry without damage
Lifting eye
With an inlet 76.2 mm (3″) in diameter, this hydraulically driven pump is capable of safely handling solids up to 30% of the flow volume. The TP03 is used for dewatering, dredging, cleaning and as an effective bilge pump. The gear motor is direct drive to the impeller, with easy access for clean out of the volute urethane bowl. The impeller is above the liquid flow, thus minimising blockages and wear.
TMT can configure to suit customer requirements.
Dimensions (mm): 420 (H) x 355 (L) x 410 (W)
Weight in Air: 14 kg
Performance: 1688 L/min (450 gpm)
Inlet: 76.2 mm (3”)
Discharge Fitting: 76.2 mm (3”) Camlock
Pump Hydraulics Working Pressure: 105-138 bar (1500-2000 psi)
Pump Hydraulics Flow Range: 26 to 34 L/min (7-9 gpm)