Simple and reliable
Self-priming
Run-dry protection
Requires no in-field power leads or hydraulics
Field proven
The LP Jetting Pump ASM is a battery powered pump suitable for transfer of non-corrosive fluids.
Simple and reliable
Self-priming
Run-dry protection
Requires no in-field power leads or hydraulics
Field proven
It can pump around 900 L on a single charge at a rate of more than 30 Lpm. The pump is used for pumping clean, low viscosity, non-corrosive fluids. The pump is ideal for transferring hydraulic fluids between IBC and ROV Backpack Fluid Skids. (Note: This pump is suitable for dry area use only. It is not suitable for pumping dirty, corrosive, flammable, caustic fluids, etc.)
The LP Jetting Pump ASM is a self-priming and automatically switches off when there is no more water to pump.
The pump includes a viewing window to help locate and identify blockages.
Dimensions (mm): 335 (L) X 146 (W) X 152 (H)
Weight: 3.6 kg
Flow: 1817 L/hour (30.3 Lpm)
Pump Lift: 5.5 m
Pump Head (Discharge Height, Max.): 23 m
Battery Voltage: 18 VDC
Pump Fittings: 13 mm NPT male to 19 mm male
Hose Fittings (required): 19 mm BSPT female