Suits Siemens DigiTRON connectors
ROV deployable
Dual acting hydraulic cylinder
The DigiTRON Collet Jacking Tool (DJT-CT) is designed to remove damaged ROV connectors (DigiTRON series 10 and 20) and can be configured to suit collets between 37 – 65 mm. A collet grips the end of the damaged connector if the handle and top interface have been lost.
Suits Siemens DigiTRON connectors
ROV deployable
Dual acting hydraulic cylinder
The DJT-CT is one in a series of DigiTRON tools:
• Intact Jacking Tool (DJT-IT, NSS-401) for healthy connectors
• Stub Jacking Tool (DJT-ST, NSS-403) for damaged connectors
• Override Jacking Tool (DJT-OV, NSS-404)
• Pigtail Cutting Tool (DPCT, NSS-405)
• Gel Caps (DGC, NSS-407)
Pigtails or potting can be removed by the Pigtail Cutting Tool (DPCT) prior to deploying either the Collet or Stub Jacking Tools (DJT-CT or DJT-ST). If attempts to remove the connectors fail, their open ends can be sealed from further water ingress by installing Gel Caps (DGC).
Connectors can be cleaned by DigiTRON Acid Injection Tools (DAIT, NSS-466) prior to any removal attempt.
Overall Dimensions, approx. (mm): Ø140 x 380 (H) x 1000 (L)
Weight in Air: ~60 kg
Weight in Water: ~50 kg
Max Operating Pressure: 689 bar (10,000 psi)
Hydraulic Cylinder: Enerpac RRH307
Lifting Capacity: 210 kN
Cylinder Stroke: 120 mm
Depth Rating: Unlimited