

Manager - Technical Sales
6 min read
"When I was a diver, we used a tool called a thermic lance, which cut through literally anything. But an ROV can't go down and operate a torch. That's when we came up with the first one - the diamond blade chop saw."
- Mark Harris, TMT
When diving shifted to using ROVs, cutting was a big problem. An ROV can’t operate a torch. So, when TMT needed to cut guide posts subsea, we had to design something from scratch.
The Diamond Blade Chop Saw is one of TMT’s earliest tools. It was designed specifically for drill support operations: if a guide post gets bent or damaged, it needs to come off before the BOP can be landed. The saw clamps onto the target with hydraulically operated arms, locks on, then advances the blade forward as it rotates.
The chop saw has been around for decades. Externally, it hasn’t changed much. But what goes inside it (the blade) has been through a complete evolution.

On land, when a diamond blade cuts concrete or stone, water cools the blade and creates a slurry. That slurry constantly abrades the blade surface, exposing fresh diamond and giving the blade a new cutting face.Â
Subsea, there’s no slurry. The blade stays clean. Run it at the wrong pressure, flow or speed and one of two things happens: the blade stalls and stops cutting entirely, or it glazes – the surface goes shiny, the diamond is no longer exposed, and you’re spinning a useless disc.
"If you do that at 850 metres, you're looking at about a four-hour transit to get back to the surface and change it. You lose a lot of time."
- Mark Harris, TMT
After years of testing, TMT found that vacuum brazed blades (the same type fire and emergency services use to cut people out of car accidents) work consistently subsea. The diamond is brazed directly onto the blade tip, so they don’t rely on the slurry effect to keep cutting.
The chop saw has been in the fleet since the early days and it’s still evolving. TMT is always looking at how to make cutting smarter, faster and more reliable for the operator – and there’s more in development that’s underway in our workshops that we’ll share soon.
We’re always looking for more talented team members who can help us shape the future of subsea engineering.
TMT © 2026 | Sitemap | Terms & Conditions | Privacy Policy
Managed by 3BY2